The garden screen completed and installed!  A nice subtle accent in my wife's wonderful landscape creation.

Not to be confused (as I did in earlier post) to the Geometric Die Heads.  After much digging around I have found tons of Geometric Die Heads, a few odd brands but nothing like the GTD one pictured below.

This GTD version seems to be adjustable over a particular range of diameters.  The markings on the chasers (the only ones with it) say 18 18.  Typical Type D chasers are specific to diameter and tpi - say 5/16-18 for instance.  This GTD version is marked 1/2" so basically the 18 18 chasers would be useful for 5/16-18 and not much else I am afraid.

The D type chasers are available, yet to find the J Hook looking ones that are used in the GTD Model.

Have to cut down the legs a bit and find the exact spot (and actually take a better pic) but other than that this one is complete!

 *Found Object Garden Screen Accent*

Took apart and cleaned up this odd ball Geometric Head....on the hunt for chasers now.  The chasers in it are odd.  They say 18 18.  From what a can gather the head is adjustable so it can do 18 tpi on a range of sizes...5/16 the only one useful?

[video width="1920" height="1080" mp4="http://lincolnsmithy.com/wp-content/uploads/2017/06/VID_20170617_154803.mp4"][/video]

In deep now.  Have the doors off the base, all sides initially stripped.  Probably won't strip inards not the actual lathe unit as I don't want to tear it down at this point.  More prep to do but making progress.

Couple of panel type projects in the works. Framed panel for garden and a found panel of heavy screen.

Wanted to free up spindle nose for shits and giggles.  Basically a proprietary Rivett L00.