Got my alignment post back from a local machinist!  I had a piece of scrap stock from a front end loader that turned out perfect.  Drilled a hole in the table (well two holes, first one did not work out so well as the unpinnings of the table got in the way). Did some final measurement with a machinist square to ensure it was precise and all is good.

 *Close up view of alignment post.*

 *Alignment Post attached to Table*

 *Close up of alignment post with frame installed.*

 *De Rosa Too Far Gone for Alignment but shown here to demonstrate the complete alignment table.*

Finally took some time today to finish up the long overdue completion of the 1979 ALAN Road Bike restore/cleanup.  Came out really nice and clean.  Actually much nicer than I expected.  Can't wait for the weather to change to take it for a spin!


Thanks to Wayne Bingham at VeloClassique for all his help and for supplying the hard to find bicycle parts to finish off the project.

Also learned a lot about truing wheels with this project thanks to Wayne.

 *1979 ALAN Bicycle - Cleaned up and Ridable!*

Used some very cool CLB Cable Housing that I got from Velo Classique.  It comes in a variety of colors... I selected the blue of course.

 *1979 ALAN Handle Bar View - Nice Velox Bar Wrap!*

 *1979 ALAN Road Bike Head Shot - Forgot how cool exposed brake cables look.*

The shop had to get worse before it got better.  Spent some holiday time getting shop reorganized to fit a surface plate I found up in York, PA at Hildebrand Machinery. It is a nice (a little bigger than I wanted) 36"x66" and weighs in around 800 pounds.  Will start working on the fixtures sometime soon.  It is short too... need to work on a base although I might keep it short to prevent my from using for something else or piling crap on it...

Also got a fork jig from my nephew Lucas!  He is a highschool machine shop student and has the bicycle bug much like me.




Got some supply from the good folks at Nova Cycles.  Got a couple of crowns to play with and enough material to build 4 forks (hoping to get at least one out of it).

[gallery link="file"]

My nephew is building a fork jig for me which should show up soon.  Certainly will add pics of that when it arrives.

Also, the quest for building a fork blade bender starts now.

Got busy this post Thanksgiving Day and finished up a number of works I had in progress.  Going to show at Gallery 222 in their annual Holiday Group Show. Opens December 4th!

Some pics of complete custom bicycle frame and Phil enjoying the hell out of it.

[gallery link="file" columns="2"]

Found this on the side of the road!  Will start tearing down and make into a fixie.  Will post project as it unfolds.

[gallery link="file" columns="2"]

Here are some shots of my second bicycle frame for my good pal Phil!  Paint coming soon!

 *Last cut and file work for the seat binder.*

 *New Cyclos alignment tools made these a snap to align.*

 *Complete handmade frame in the Raw!*

Made from serveral hole augers and some older harrow discs.  Stands about 6.5 feet.

 *Found Object Sculpture - Augers and Harrow Discs*

I have had this around the shop for some time.  I just started playing with it again and added the pipe to it.  I really like the way it is going.... It might be done but I will stare at it for a while.