Got pedestal completed after much stress over height considerations. Ended up going a few inches below my elbow.
Next step: commit to a spot on the shop floor and bolt her down.
Vise – Setting up Permanent Pedestal
Finally setting up my vise for good! Building pedestal and will mount to floor. Sick of rattle and shake on Chinese vise attached to workbench. Picked this vise up last summer at Liberty Tool in Liberty Maine.
Will weld up soon and red head to the floor.
Side note: bored out the 3/4 and 9/16 holes on the millrite….made easy work of the 5/8″ plate.
Cut to the Chase – progress/complete?
Very happy with final layout of this one. Slotted flatbar made for a cool effect of the blade cutting to the chase.
Cut to the Chase
In progress along with totemesque…something should spark them to completion I hope. Large saw blade on great remnant base.
Totemesque in Progress
Not speaking to me yet but getting close. Old bush hog blades and industrial flange of some sort…more work tomorrow.
Machine Shop taking Shape
Started cleaning up the shop and organizing it around the two recent milling machines that I found over the summer. Next steps, get vise situated on stand and fine a lathe sometime soon. Will start next frame soon enough as well.
Selle An-Atomica
Swapped out my old saddle to test ride a new Selle An-Atomica Titanico-X. Thanks to Velo Classique and their handy Bici Support fitting tools that made swapping the saddles a breeze. Not to mention Velo Classique has a test saddle (as shown) so you can try before you buy.
Bringheli Tube Cutter – adapting to horizontal mill
Still learning the nuances of the mill and the jig but coming along well. Got centering with edge finder working. RPM slow on the mill so edge finder a little tricky but worked well enough.
Handrail – a clever splice
Had to splice this section together to keep the top rail as seamless as possible. Can bolt back together onsite.
The U. S. Burke Machine Tool Company Model MV
Some pics of her in the shop. Cleaned a few small areas on the table and ways to get a feel for what I am in for….not bad at all.